Some laser cutting work and CNC fabrication we did for Keysight Technologies, CNC Wood Room DividerSome work we did for Keysight Technologies, CNC Wood Room DividerSome work we did for Keysight Technologies, CNC Wood Room Divider

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Check out these room dividers we made for Keysight Technologies. These 4×8′ panels were CNC cut to shape, then sanded, framed and stained. We also custom fabricated these floor stands, with matching cut inserts that channel together, which not only match nicely but also eliminate the need for visible hardware (or any for that matter). Extra thank you to Jacquie for her help conceptualizing and developing the end product.

MakePi-1MakePi-2

 

 

 

 

 

 

 

 
Thanks to the good folks at Maker Shed for choosing us to help with manufacturing their Raspberry Pi Starter kits. These credit card sized enclosures house a tiny Linux computer, complete with HD, USB, A/V and SD card inputs.

Some work we did for PayPal; laser cut signageSome work we did for PayPal; laser cut signageSome work we did for PayPal; laser cut signageSome work we did for PayPal; laser cut signage

 
 

 

 

 

 

 

 

 

 

 
Enhanced Lighting and Audio/Visual asked us to cut this massive Paypal logo for their Battle Hack contest. The 20′ wide letters were CNC cut on gatorboard and used as a raised surface to project video mapped imagery during the contest and award ceremony. See video.

SpiceRack1SpiceRack2

 

 

 

 

 

 

 

Here’s a picture of my wife’s rack.

Some work we did for the Mike Tyson gym with Logan Hicks, Joe Iurato, and wood CNC stencilsSome work we did for the Mike Tyson gym with Logan Hicks, Joe Iurato, and wood CNC stencilsSome work we did for the Mike Tyson gym with Logan Hicks, Joe Iurato, and wood CNC stencils
 

 

 

 

 

 

 

 

 

 

 
Joe Iurato and Logan Hicks knock out these massive murals for Mike Tyson’s gym using a tall stack of 4×8′ CNC cut stencils.

Some work we did for the Ceres Project, laser cut back-lit wood name badgesSome work we did for the Ceres Project, laser cut back-lit wood name badgesSome work we did for the Ceres Project, laser cut back-lit wood name badgesSome work we did for the Ceres Project, laser cut back-lit wood name badges
 

 

 

 

 

 

 

 

 

 

 

 
Kim Stufflebeam had an idea for a light up name badge for the Ceres Project staff to wear at their annual fundraiser “Harvest of the Heart”. We’d tell ya how we pulled it off, but that would ruin all the fun. We’re sure you’ll figure it out…

Some work we did for Beau Stanton, laser cut stencil and skull box Some work we did for Beau Stanton, laser cut stencil and skull box
 

 

 

 

 

 

 

 

 
Amazing skull and pattern design by Beau Stanton

Some work we did for AlfstadAnd, multi-size positive and negative wooden stamps
 

 

 

 

 

 

 

 

 
Multi-size positive and negative wooden stamps for Alstad&. Thanks to our friend Boardinker for the connect!

Some work we did for Alexander Olch, custom laser cut wood tie boxes for displaySome work we did for Alexander Olch, custom laser cut wood tie boxes for display
 

 

 

 

 

 

 

 

 
Custom made boxes for Alexander Olch

Some work we did to replace this vintage elevator switch plate

 

 

 

 

 

 

 

 

 

Is there any way you could replace this irreplaceable elevator switch panel? Yes.

Billi-Kid---Immaculate1Billi-Kid---Immaculate2
 

 

 

 

 

 

 

 

 

 

 

 

Some beautiful stencil work by Billi Kid

garcia_2_overview_finalgarcia_1_final
 

 

 

 

 

 

 

 

 

Laser cut and engraved maple wedding invitations with a lacquer finish for our friend Jeremiah Garcia. Congratulations!

shilo_detailshilo_books

 

 

 

 

 

 

 

 

 

 

 

 

 

Laser engraved Moleskines for our friends at Shilo.

wheel_1wheel_2wheel_6

 

 

 

 

 

 

 

 

 

Check out the “Wheel of WTF”, a prize wheel we made for Non-Toxic Revolution at Keep A Breast’s tent at this year’s Vans Warped Tour. If you’re going, see if you can spot it and email us a pic! We might just send ya something back… (wink)

gianni_1gianni_2gianni_3

 

 

 

 

 

Sign we made for my friends Dominic and Alyse to help decorate newborn Gianni’s bedroom. Hand drawn type, laser cut and stained. Fresh out the womb.

quotewall_4quotewall_5quotewall_6

 

 

 

 

 

Excited to make this installation for our Miami Marlins. 30 quotes were designed and positioned on the same size sign and laser cut on 3 different colors. Hopefully this spot of inspiration will help put a few W’s in the win column.

woodinvite_2

 

 

 

 

 

 

 

 

 

 

 

 

Congratulations Daryll and Rosie! These wedding invitations were laser engraved and cut on birch and mailed as shown, without envelopes.
The bride and groom requested that their guests bring the invitations with them to the wedding to be burned that evening in a bonfire.

octopus_web

 

 

 

 

 

 

 

 

 

 

 

 

This three panel, 16×32″ octopus piece was created upon request for a private client. The octopus was laser engraved on three separate pieces of blue acrylic. It is bordered with handmade wooden frames stained to highlight this harmonious triptych.

graduation_2

 

 

 

 

 

 

 

 

 

 

 

 

Congratulations Jimibean. Laser engraved high school graduation announcement on black anodized aluminum.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Laser cut clothing hang tags on matboard for fashion designer Shah Riaz

 

 

 

 

 

 

 

 

 

 

 

 

Non-Toxic Revolution had an idea for a wooden book to help illustrate and educate on the massive issue of ocean pollution on this planet. Ink printed one side, and laser engraved other, on 1/4″ wood.

 

 

 

 

 

 

 

 

Customized 311 wooden medallions to celebrate their 2013 Caribbean Cruise.

 

 

 

 

 

 

Believe! Birch wood base with a white acrylic lettering overlay. Customize your own…

 

 

 

 

 

 

Check out these 2 sided laser engraved chips and business cards, inked and etched on Maple for Boardinker.